Note: Obtain all remote transmitters for this vehicle.
Note: Do not depress the brake pedal during procedure.
1. Turn ignition from OFF to RUN 8 times within 10 seconds,
with the 8th time ending in RUN. Door locks will cycle to confirm programming
mode. (Off is the position where you can remove your key, RUN is the position
just shy of starting your car.)
2. Within 20 seconds press any button on the first keyless
remote to be programmed. Door locks will cycle to confirm programming. If you
only have one remote then skip to step 4.
3. Within 20 seconds, press any button on the second keyless
remote. Door locks will cycle again to confirm programming. Repeat step 3. For
all other remotes.
4. Turn ignition to OFF. Locks will again cycle to indicate
end of programming mode.
