Please also note you will need to program the remote to your vehicle. This will NOT show up at your door all ready programmed. If you DO NOT have two working keys you will need to get this remote programmed by a professional. They will Charge you for this. We recommend a mechanic or Automotive Locksmith before going to the Dealership.
Please Note: Make sure your current working remote looks like the picture above. There are different button configurations for this remote. If your current remote DOES NOT have the same button configuration as in the pictures, this remote WILL NOT WORK with your vehicle. Sound Confusing? We know that these Fobik remotes can be confusing that is why we are giving you this! OUR PHONE NUMBER 402-964-2720. I mean who does that anymore. We are here to help you throughout the whole experience.
SELF PROGRAMMING INSTRUCTIONS FOR A 2008 JEEP GRAND CHEROKEE
Obtain all remote transmitters for this vehicle.
THIS PROCEDURE IS FOR FOBIK REMOTES YOU MUST HAVE TWO WORKING FOBIK REMOTES TO USE THIS PROCEDURE
1. Insert first programmed key into ignition switch.
2. Switch ignition ON for at least 3 seconds but no longer than 15 seconds.
3. Turn ignition OFF and remove key.
4. Within 15 seconds insert second programmed key into ignition switch and turn ignition ON.
5. After 10 seconds an audible tone will be heard and immobilizer warning lamp will flash.
6. Turn ignition OFF and remove second programmed key.
7. Within 60 seconds insert non-programmed key into ignition switch and turn ignition ON.
8. After 10 seconds an audible tone will be heard and immobilizer warning lamp will illuminate for 3 seconds.
9. Switch ignition OFF.
10. Remove key.
11. Check operation of programmed key transmitter.
12. Repeat procedure for additional key transmitters if required (up to 8 key transmitters can be programmed).
So far, so good! 
