New Key Fob Remote For a 2001 Chrysler Sebring w/ 4 Buttons & Programming

Home > Chrysler > Sebring > 2001 >

Alternative Views:

Our Price: $18.77

FCCID: GQ43VT17T
Battery Size CR2032
Note: Batteries sold separately

Quantity in Stock:82

Availability:: Ships Next Business Day
Product Code: 2001-CHRYSLER-SEB-17T4B-FOB

Qty:

Item Specifics

Compatible with: 2001 CHRYSLER SEBRING

Bring your 2001 CHRYSLER SEBRING out of the dark ages and back into the modern era!

Key fob, car remote, clicker thingy, key bob… We've heard it called just about everything under the sun. No matter what you call it, one thing is certain: life is just a little bit sweeter when you can lock and unlock your car with the push of a button. Let's face it, it's the 21st Century and no one has time to fumble with caveman technology trying to stick a key into a lock to get into their car. Once you receive your new key fob simply program it to your vehicle and you'll be sliding in and out of your car with ease just like the rest of the cool kids.

Questions?

Programming Instructions

2001 CHRYSLER SEBRING

YOU MUST HAVE ONE WORKING REMOTE FOR THIS PROCEDURE TO WORK. IF YOU DON'T HAVE ONE WORKING REMOTE THEN YOU MUST HAVE THE REMOTE PROGRAMMED BY A DEALER OR LOCKSMITH.

PLEASE READ ENTIRE PROCEDURE BEFORE PERFORMING. SOME VEHICLES MAY USE ONE OF TWO PROCEDURES. IF PROCEDURE 1. DOES NOT WORK THEN PLEASE USE PROCEDURE 2.

Programming procedure #1

Obtain all remote transmitters for this vehicle.

1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine).

2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.

3. While holding the UNLOCK button during the 4 to 10 second period, press the panic button for one second and release both buttons at the same time. A chime should sound within three seconds to indicate the vehicle has entered programming mode.

4. Press any button on the remote used in step 3. You should hear an audible tone indicating that remote has been re-programmed. This step must be done within 30 seconds of hearing first chime in step 3.

5. Within 30 seconds of completing step 4. press any button on the next remote. Repeat step 5. for all additional remotes including working remotes.

6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.

Programming Procedure #2

Obtain all remote transmitters for this vehicle.

1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine)

2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.

4. Press the LOCK and UNLOCK buttons simultaneously on the same remote used in step 3. then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. This must be done within 30 seconds of step 3.

5. Within 30 seconds of completing step 4. press the LOCK and UNLOCK button on the next remote then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. Repeat step 5. for all additional remotes including working remotes.

6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.