New Keyless Entry Remote Key Fob For a 2008 Toyota 4Runner w/ Programming

Home > Toyota > 4Runner > 2008 >

NEW 2008 Toyota 4Runner Keyless Entry Key Fob Remote Free Program Instructions

New Keyless Entry Remote Key Fob For a 2008 Toyota 4Runner w/ Programming

Alternative Views:

List Price: $79.95

Our Price: $28.77

Savings: $51.18

FCCID: HYQ12BBX
Battery Size CR2016
Note: Batteries sold separately

Quantity in Stock:3

Availability:: Ships Next Business Day
Product Code: 2008-TOYOTA-4RUNNER

Qty:

THIS IS A BRAND NEW REMOTE. ALL OF OUR ITEMS HAVE BEEN TESTED AND WE OFFER A 100% MONEY BACK GUARANTEE, SO PURCHASE WITH CONFIDENCE AND NO RISK!

VEHICLE: 2008 Toyota 4Runner

PROGRAMMING INSTRUCTIONS: GOOD NEWS! THIS REMOTES IS SELF-PROGRAMMABLE, NO PROFESSIONAL NEEDED. PLEASE SEE BELOW FOR COMPLETE PROGRAMMING INSTRUCTIONS

KEY FOB INCLUDES NEW BATTERY

WE HAVE PHONE SUPPORT: 402-964-2720

This is a Brand New Keyless Entry Remote KEY FOB for a 2008 Toyota 4Runner. This Key FOB fits many other vehicles, please see listing for list of compatible vehicles.

Please also note you will need to program the remote to your vehicle, the remote will not just show up and work. The programming instructions for a 2008 Toyota 4Runner are below.

We ship United State Postal Service First Class mail and have items shipped within 1 business day. Please email with questions. 100% Money Back Guarantee!

PROGRAMMING INSTRUCTIONS FOR 2008 Toyota 4Runner

1. Start with the key out of the ignition, drivers door is open all others closed and drivers door is unlocked.

2. Perform these steps within 5 seconds. A. Insert the key into the ignition(Do NOT Turn) Pull key out. B. Insert the key into the ignition(Do NOT Turn) Pull key out.

3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition(Do NOT Turn) Pull key out.

4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start) then back to OFF. F. Remove the key from the ignition.

5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.

7. Open drivers door.

eBay Inventory Software and eBay Automated Listing Powered By: